-
January 2024 by Ben Hobson
Simple jobs cost like I am building a space shuttle. The only reason for 2 stars and not 1 is that they have priced themselves out of the market so they are able to get the job done in 1 day.Last time I made this mistake I told myself to not go back to them, well I forgot, hopefully my memory is better this time and my wallet will feel much better.
-
November 2023 by Kendall S.
By far the worst engine shop i have ever been to. I brought them a big block Mopar engine that only needed to be freshened up with new bearings gaskets and basically looked over. When I got the engine back it was missing parts and the workmanship was horrible, too make a long and horrifying story short I have not been able to drive my car since I have taken the engine to two other engine builders have spent 3 years and over 20,000 dollars trying to fix it. DO NOT TAKE ANYTHING TO THIS SHOP.
-
June 2023 by Michael Williams
I paid them $3,500 to rebuild an engine only to find out the timing chain was put on out of sync. Had to pay a shop $700 to redo it.Service: Engine repair
-
April 2023 by josh croskey
Great service very informative and attentive to detail they will have all my business from now on
-
February 2023 by Cody T
Had an IH tractor cylinder head freshened - milled, valve job etc. Got head back and valve spring retainers were mixed up some of the exhaust rotator retainers were on intake valves & vise versa. Had to swap them around myself at home. Overall tractor runs great no real complaints, but definitely odd for detailed machinist to let that slip past.Service: Engine repair
-
January 2023 by Brent DeHollander
So I brought my engine here asked for a clean, hone the cylinders and mil the head, polish the crank and tear down of the short block . So he asked for 500 for initial deposit for tear down. He out sourced the crankshaft work that work was very good. I look at the block there was rust in the cylinders, the head wasn’t touched, cylinders were honed but the engine in total wasn’t taken apart all the way still had a bracket I wanted off and he didn’t clean any of it gasket maker on both sides of the block and head gasket material on top of the block. I had someone pick it up for me because I was out of time worst mistake I would have never payed 1100 dollars for nothing. The only good work was from hart machine shop. Fees are added at the end of your bill so get a print out of the totals mid way through cause fees are added out of the blue or just don’t go hereServices: Motor building
-
October 2022 by Jason Scott
Good place to get stock engine machine work done. Have to watch prices at time as they like to add things to the bill that are unnecessary.
-
August 2022 by Dchollandjr
Took 3 more days than expected but did good work at a cheap price
-
May 2021 by Chris Borton
Awsome staff. Straight forward and very knowledgeable
-
February 2021 by Richard Riffe
Good people and cheep prices. And quite service
-
January 2021 by Nate M.
NEVER AGAIN will I bring an engine to this place. Brought them an engine to get completely rebuilt. When I dropped it off, I told them everything I wanted done to it and made it perfectly clear. New bearings, bored if needed, balanced, new pilot bearing because I was swapping the auto for a 4 speed, do the heads with new springs and valves etc...They said it would take 4 or 5 weeks to get to it because they were so busy. No big deal. (I now understand why after seeing everyone sitting around doing nothing every time I came to drop off parts). Once they started, it had to get bored with new pistons as I expected. Half way through the build, the person working on it changed to someone else who clearly had no idea what was going on and I got at minimum 2 calls per week asking me to explain what I wanted done with it. He also would explain every time how he needed certain parts, which I had to explain that I had already dropped off. In the end, it took 4 MONTHS before I got it back. Picked it up, and brought it home. A few weeks later, I discovered there was no pilot bearing. I went back and looked at the receipt and they never even charged me for it. Looking further, I noticed it didn't mention it was balanced (should just be common sense with new pistons, plus I specifically told them to). Called them to clarify and the guy on the phone said "oh no, we don't balance engines. You don't really need to anyway as long as your not racing it. I don't know where you heard that you need to have it balanced". So now I'm taking the engine back to another shop to get torn apart again, balanced, and put back together. (Edit: took it to another shop and they found at least 2 internal oil plugs that were missing. If I had started that engine, it would have had 0 oil pressure. 2 connecting rods were put in the wrong spots, freeze plugs were crooked, valves were all set at different heights, valve locks were wrong, oil pump gear was installed upside down and the oil galleys were packed full of ****. Guy said this thing would have no doubt self detonated) Do yourself a favor and stay the heck away from these guys. They'll try and screw you every place they can.
-
November 2020 by Nate Michalak
NEVER AGAIN will I bring an engine to this place. Brought them an engine to get completely rebuilt. When I dropped it off, I told them everything I wanted done to it and made it perfectly clear. New bearings, bored if needed, balanced, new pilot bearing because I was swapping the auto for a 4 speed, do the heads with new springs and valves etc...They said it would take 4 or 5 weeks to get to it because they were so busy. No big deal. (I now understand why after seeing everyon
-
September 2020 by Brian Small
Best place in the area. I like it great workmanship ???☠️?☠️???
-
September 2020 by Brandon Beaty
Dropped off my flywheel with no appointment and it was finished same day at a great price.
-
August 2020 by Greg Adams
called and ask about checking a 2.4 head for cracks, resurfacing, and valve job. Was told on the phone 255.00. Dropped head off and was told it would be ready that evening or early next morning.. Finally got the head back after 2 days because they forgot to do the valve job, and was charged 400.00. I will never use this shop again and certainly would not recommend it to anyone else for any reason.
