-
November 2025 by Carol Chen
Thank you for fixed my mixer :-)
-
August 2025 by Jeremy Ohlheiser
This is the spot!
Thanks Josh.
-
July 2025 by Karsten Delk
Josh did a great job building me a charge pipe and welding on a flange to my turbo
-
April 2025 by Charles Allcorn
I have used The Pad twice and they have done a fantastic job. I highly recommend them. The welding they did was exactly what I wanted.
-
April 2025 by Kenneth Harrison
So it took me months to figure out a thousand dollar repair or total replacement. My RV awning upper arm was bent and needed replaced. Unfortunately, there is no new purchase on a part. Just a whole new assembly was offered. I did find used parts but the wrong arm pitch. So I decided to stop in see what my options were, on a repair or building a new arm. To my surprise, a fix was offered and works like new. I painted and installed works as designed. Your shop was amazing affordable turn a round time less than 2 days. So much more affordable than a whole new awning, Thanks again, and it will be a great summer using my RV awning.
-
April 2025 by Sid Hedrick
They did a great job on my van and a very reasonable price.
Highly recommend them.
-
February 2025 by Ken
These guys are awesome! I took a cracked motorcycle exhaust pipe to them and they took care of me on the spot. They welded it perfectly, and it works just like a brand new pipe. Thank you!
-
September 2024 by Robert Barclay
So great. Excellent customer service. I was in a bind and needed a very small welding job as a part of our deck assembly had broken welds. I called and they suggested I come right over. When I arrived, I was quickly greeted, they took the parts in the back. I had a short wait and they emerged with everything perfectly done, even added some reinforcements to ensure it would hold.
Can’t thank these guys enough. Well done!!
-
June 2024 by Eric D
Needed aluminum fab/welding done on some charge pipes and they did great work.
-
April 2024 by Trish
My Challenger had a rattle in the exhaust and no muffler shop in town would touch it because it would make the computer show a check engine light. The comment from most was I could buy a kit to fix the code or take it to the dealer. I couldn't believe no one wanted to put on an aftermarket on my car and fix it! So thankful to have found Josh and The Pad, I have Borla Cat-backs and now my only regret is that I didn't get them sooner! It sounds better than I could have ever hoped for! This place knows their stuff!!!
-
March 2024 by Ashley Adams
Just look at the badass job they did!!… I am referring my oldest daughter so she can smoke out her lights as well. Best job and best pricing!!! Worth my drive from Moore ?
-
March 2024 by Brett Seaberg
Great work!!!
-
November 2023 by IamLucy646
If I could give more stars I would. I want to start off with, I have a BMW that I baby. I am very picky with her and only want the best. I bought a $2,300 Laptorr exhaust. The exhaust was not the sound I was hoping for and was really worried that I would have to spend another 2k for a different exhaust.I was recommended by Edmond Motorwerks that The PAD was a good place to weld/mod exhausts. I spoke to Josh, and he gave me a lot of great information and suggestions that I could do to change the sound and make it more aggressive. Josh was super patient, answered all my questions (which I had a lot), and even went under my car and looked thoroughly at my exhaust. I noticed as well that my exhaust tips were a little crooked and he adjusted them for me, no charge.My main concern with the exhaust was that it had a lot of droning noise, and that it was not aggressive enough (loud). I do not like droning noise, especially inside my BMW. I was really bummed out.I had an idea and decided to cut the resonator and add a stainless steel 2ft long pipe. The droning noise was sooooo much worse and louder, but it did bring out a more aggressive raspy sound that I liked.A nice Gentleman that also worked at the PAD (sadly did not get his name) suggested to add a resonance chamber to this exhaust! Josh said too that it was a great idea and that it could possibly help a lot with softening the droning sounds at low rpms, but also keep the aggressive tone. I found out as well that getting the right exhaust sound is very, very difficult. You will not know unless you try it. So, all of us were just guessing at this point.I decided to go for it and take a chance. The result was amazing (so glad I did)! The droning noise is barely noticeable after the resonance chamber was Tig welded on!It now sounds like the exhaust I have always been wanting. The Chamber also made the raspy/growing louder, but in a very deep, calming tone that I like.The way the PAD welded on everything, it honestly looks like the exhaust came with the chamber and the 2ft stainless pipe, when originally it did not.They did an Amazing job, and they took their time. The price was perfect and affordable.Thank, thank, thank you! I A++ approve and would definitely recommend to my friends and family to come here.Ps. Thank you to the two that helped me this morning, and the idea! -Lucy
-
November 2023 by Andrew Brown
Stopped by on a walk in, got to meet with Josh, and spit ball ideas for cooling my car down a bit more. He is a brilliant mind, very capable, and was able to come up with some reasonable suggestions on the spot. I look forward to working with these guys down the road as they've given me several things to consider for my next project. Referred here by SPEEDhaus, and will be returning for sure.
-
November 2023 by Austin Rheault-Koropatkin
These guys continue to be my go-to shop for my projects. From simple things like needing something cut or welded, they're able to get it done quickly and professionally. Even when things don't go according to plan, they're easy to work with.Services: Exhaust