February 2020 by Justin Opinion
First of all they don't like to be reviewed with real facts of their less than stellar quality control. They blocked my comments on facebook. Purchased a drop spreader from them and before I could even try it outside it was leaking all over my garage floor. Turns out three hydraulic fittings were hand tight, and the rest were barely tight enough not to leak, very poor workmanship. The quality assurance is non existent, hoses frayed during transport because of poor workmanship and hydraulic components with hoses so tight they are like steel rods. Any technician who is familiar with hydraulics knows hyd hoses flex/move during actuation and heating/cooling. There has to be some flex/give for this expansion and contraction. Bearings with no grease, loose hoses, frayed hoses etc, if you purchase from these guys, (I would not) make sure you check every fitting, hose, nut, bolt and grease fitting before you try and activate the hyd system. Absolutely no quality control what's so ever, beware of their workmanship! My recommendation, save yourself big headaches or costly repairs and purchase from a reputable manufacture who has knowledge of hydraulics and has a stiff quality control program.
