-
March 2024 by Aaron Cummings
These guys are experts on cars, but I used them to powdercoat the swingarm on my dirtbike. They did an awesome job. Attention to detail and not coating the parts that will mate up to other metal was clutch - and they knew to do it without me asking. Great to work with.
-
December 2023 by Timothy Otten
Be careful when dealing with Mike Quinn. I had my FD RX-7 at his shop back when it was called Unique Precision Rotary. When I arrived to pick up my car it had significant body damage which happened while it was under his care. He didn't tell me about it before I came so I ended up taking the car and having it repaired at a body shop. Unfortunately I had funny paid for the work Mike did. It was a struggle to get Mike to reimburse me for the cost which he did partially but I ended up giving up because I was tired of hearing excuses from him. This happened a while ago and he has since changed his business name so hopefully he has improved his business practices.
-
July 2023 by Treston Laberer
If you want something quick and easy that can be installed in a day or two, RPM is great! I've known Mike since October 2019. Mike is an expert on cars. However, my experience dealing with RPM on the current project full rebuild & custom job is as follows; I haven't seen my vehicle since May of last year it appeared to be near the finishing point then. I've tried contacting the shop via phone during business hours for an update but no response. I've confirmed with Mike on the proper email for RPM and gave them time to review and get back to me. No response. When there is no communication between a project you have invested time and money into, being in the dark is never fun. I've been patient, and just getting periodic updates goes a long way in communicating. Until the lack of communication is remedied, I can't recommend RPM for Project builds.Services: Transmission
-
July 2023 by Ritwik De
Took my series 2 rx8 over to they guys for some upgrades(wheels, tires, ignition, exhaust, tune, coilovers). they did a fantastic job. Their recommendations are on-point, and happy to answer questions before and after. I actually consulted Mike before I bought mine, and they are happy to answer questions after your service is done. Only caveat would be their timing isnt the best(i.e it may take a bit longer than initially estimated), but thats a minor issue. Speak with them, they are good folks and will take care of your rotary powered car (or otherwise, yes they also work on piston engines too!)Services: Exhaust
-
May 2023 by Weeb Sary
Mike and his team did a phenomenal job on my Supra. Sure it was a longer process than expected but he made sure to take his time and get it done correctly. There are some minor bugs to be worked out which is to be expected but Im definitely very happy. Even days after pick up he called me to see how it was running and if I had any additional concerns. Definitely awesome customer service.Service: Auto engine tuning
-
May 2023 by bradley moats
Took my car here to get my exhaust welded. They do amazing work and the welds were perfect! They fit me into their schedule and got my car knocked out FAST. I will be bringing my car here for all future work needed! HIGHLY RECOMMENDEDService: Exhaust
-
February 2023 by Frank Leroy
My situation is rather unique, I have an old school Hotrod 1957 Chevy Bel Air with a Big block Pat Musi engine. RPM specializes in Rotary engines which is miles away from what I have. I visited the shop and met "Professor" Mike Quinn and TIG man Brendon Fowler, I think my first conversation started with me stating "I think I'm in the wrong Place". We spoke and I told them that I wanted a handmade full 3-inch exhaust system for the old Hotrod. They gave me a tour of the facility and showed me their collective talents with Fabrication, restoration, coating, performance and assembly/Dyno. I was quite surprised that they actually wanted to see and work on my car. Upon arrival of my car the guys treated it with kid gloves, and I had no issues about leaving it in their facility. We discussed the work I wanted done and after several suggestion from Mike and Brendon it was decided to remove the entire old system and go with a complete RPM fabricated stainless exhaust system, the was done at a very reasonable price point for both of us. when the system was completed, I was very impressed with their work and attention to detail for the exhaust system and some of the productive recommendations they made concerning the car. Future plans will include Holly sniper system and performance shock package. Although these guys are Import specialists, they also KNOW performance-oriented Hotrods! The RPM Facebook page contains the pictures of the build. I give my thanks and appreciation to the RPM staff.Well done, Gentlemen!!Regards. FrankService: Exhaust
-
January 2023 by Paul Fernandes
Can’t say enough about the superb work and support we got at RPM. Mike and his team walked us through every step of the process in building an RX8 based track toy, including finding the right donor car to start the build. These guys know the rotary platforms inside and out. We got excellent advise and meticulous craftsmanship with the engine build, extensive fab work and engine tuning. Would highly recommend you talk to Mike before you embark on any rotary project.Services: Wheel alignment
-
December 2022 by Shazad M.
mike is a thief ,scam ,fraud and a big time liar . This criminal stole my $40,000 and gave me back a piece of crap also kept my car for two years and brought my car to a diminished stage , very dishonest shop , very dishonest people . MIKE is the most dishonest and very disrespectful , and also very brave with his dishonesty , Dishonest MIKE thinks he cannot be shut down ,the FBI will take care of this bandit and put him away for a long time . He deserves zero stars and five XXXXX , do not take your car to DISHONEST MIKE you will just be wasting your time and money my contact number is 646 258 5770 . I have a lot more negative comments that i will be posting about MIKE THE SCAM stay tuned or give me a call , I invite everyone to come and see for yourself the mess that MIKE FROM RPM IN MARYLAND did to my car,RPM stands for ROBBING PEOPLES MONEY . It is not rotor piston motorsport
-
December 2022 by George C
My experience with RPM was great, Mike Quinn and his team are very knowledgeable and I saw a few YouTube videos of him repairing rotary engines to confirm this. The repair took a bit longer than expected, but at the same time if you want something done right, you have to wait for it. They did an entire engine overhaul, custom intake for the Holley Sniper setup, fabricated the stainless steel exhaust system from the mid pipe down, fabricated and powder coated brackets that needed replacing, installed BC racing suspension all around and properly tuned the car. Their follow up service is excellent as well and want to make sure that I am satisfied with the setup. I definitely recommend them.Services: Wheel alignment
-
December 2022 by Zav
Mike and the team are extremely knowledgeable and talented rotary experts producing some of the highest quality work around. Great communication throughout service, and a great end result. They have an incredible workshop full of competent and passionate rotary mechanics doing everything from custom fabrication, powder coating, tuning,, you name it. Anything you need, this is where to go. Thank you to Mike and the team,, I’ll see you come spring
-
December 2022 by Brian Y
There's a reason people from all over the Midwest and East Coast bring their rotary projects here. It starts with the fact that rotary shops are few and far between. Sure, you can go to the dealership, but you pay dealer prices and they do everything by the book, so if you want custom work or personal attention, you have to look elsewhere. And "elsewhere" might be in the next city or state. Lucky for me there's a team of rotary experts only about four hours away. Sure, it’s a little far for an oil change, but when I wanted a reman for my RX8, I called Mike and his team at RPM. I had a good experience with them a few years prior, so they were the first and last call I made. It took some time to do the work, but I wasn't in a hurry and I felt better knowing they weren't going to rush the job to completion just to get the next job in. It was worth the wait. The car drives and handles probably better than it did brand new. Best part is service after the sale. Mike is always responsive and helpful. Even when he’s off the clock, he’ll take time to respond to texts or even give me a call if I have a question or issue. Kudos also to the guys at the shop. You can gather by just talking to them, that they love rotaries and are proud of the work they do. Thanks Mike and RPM!Services: Steering & suspension replacement
-
December 2022 by Geddes Patrick
I must admit, the guys at Rotor Piston Motorsportz are the real deal, seriously.Had conversations with the specialist and these guys love what they do. As a customer those are the kind people you want working on your car. They go the extra mile.Had a rebuild on my 1993 RX7 in 2019 and it still runs like a charm. Recently had the HSD suspension installed and an oil change last week. They service all makes as well.I hope they are around for long long time.Make it your business to check them out.You won’t be disappointed!Services: Steering & suspension replacement
-
November 2022 by Tyler Michaels
Mike and the crew are very knowledgeable with what they do!When I called and inquired about a race engine build for my RX-8, Mike was upfront and honest about the estimated time of the build due to shortages and current shipping times. Michael was timely with updating me on the status of the build and what to expect next. He also helped me with pricing on a few items I wanted to have done which I am very thankful for!Once the build was completed, it took only a couple days to ship from Maryland to arrive here in Michigan; It came well protected.RPM is the way to go if you want a high quality engine!?
-
November 2022 by kenny miller
Awesome shop even better people. Mike and his team took care of my daughter’s vehicle with skill and care that far exceeded my already high expectations. Mike knew how important this was to me and when he told me that he approached it as if it would be his daughter that would be driving it, I knew I picked the right place. He truly cares about the work he does and product he puts forth. He even sent me a message the next day to make sure my daughter was happy with what they did! Can’t thank him enough!!